Radio

From PCSAR

Revision as of 21:23, 25 September 2011 by Brett Wuth (Talk | contribs)
Jump to: navigation, search

Contents

Equipment

Draft radio equipment procedures:

Check Out

  • Use equipment sign out sheet
  • Test hand held radios
    •  ? how to test ?

After Incident

  • recharge all handheld radio batteries
    • batteries can be charged separately or while attached to handheld
    • handhelds must be turned off
    • place new radios/batteries in round holders
    • place old radios/batteries in square holders
    • light should be red
    • flashing red means problem
    • light is solid green (not flashing) when completely charged
    • recharge takes about 3? hours
      • (type 2 & 3 batteries: 1 hour)
  • Test equipment
    • should we test equipment before returning it into service?
    • note any problems and report to Equipment Manager


Routine Maintenance

? What things should be done regularly, e.g. once a month?

The radio batteries need to be recharged regularly. They loose approximately 2% of their charge every day.


Inventory

new handheld radios:

  • 3 Motorola HT750 portable radios (16 channel VHF)
    • each with 1 Motorola HMN9053B RSM (Remote Speaker/Microphone)
      • one broken, needs replacement
    • each with 2 Motolora HNN9008AR NiMH/High Capacity batteries
    • each with with Motorola HTN9000B charger
    • serial numbers:
      • AS/N 672TZY9802
      • AS/N 672TZY9804
      • AS/N 672TZY9808
  • old handheld radios:
    • 3 Motorola MT1000 portable radios (16 channel VHF)
      • each with leather holster
      • each with 2 Motorola NTN5447B NiCad batteries
      • each with with Motorola NT4633B charger
      • serial numbers:
        • 751PQG1004-5
        • 751PQG1001-5
        • 751PQG1005-5
  • vehicle radio:
    • 1 Tait 24 Channel VHF mobile radio
      • part number: T2015V-313-A00
      • serial number: ? ES/N 622232

Labels

See PCSAR DOC-111 Radio Equipment Labels.

Channels

See Channels.

How to Use

  • To put the HT750 on Scan, push the button above the transmit button. To take it off scan, push it again.
  • To put the MT1000 on Scan, push the toggle towards the antenna.

Operations

See:

Training

See:

Retrieved from "http://pcsar.dyndns.org:8080/mediawiki/index.php/Radio"
Personal tools